Printable PDF: Alta Marea Super Acrylic Mid Sheen




  • A high quality mid sheen finish flexible wall coating for interior and exterior use, providing excellent durability, weather resistance, colour stainability, opacity and wash ability.
  • Ideal for high traffic areas or surface that may be required frequent washing.





  • Surfaces must be clean and free from loose material.
  • Surfaces must be primed correctly utilizing surface preparations specifications recommended by the manufacturers.
  • May be applied directly onto clean previously painted surfaces.





  • With either a sheepskin roller or brush.
  • Can be applied using an airless spray gun.





  • Type:                           Modified Acrylic.
  • Water Resistance:      Surpasses the SABS 044:1900 Code of practice rain
    Penetration test over a 24 hour period. .
  • Drying Time:               Surface Dry ½ – 1 hour.
  • Viscosity:                     95-100 Kerb Units.
  • Relative Density:         1.2 – 1.25 kg/l.
  • Solid by Mass:            50-52%
  • Spreading rate:           8-10m²/litre depending on surface porosity and texture.
  • Finish:                          Mid Sheen
  • Clean-up:                    Water
  • Colour:                        White, Pastel, Medium and Deep Tone





  • Mixing: Stir well before use.
  • Method: Sheepskin roller or brush. Can be applied using an airless spray gun.
  • Thinning: Not recommended, but tap water if required. Thinning reduces the opacity.
  • Clean up: Tap water.
  • Spreading rate: 8 – 10 m ²/l depending on surface porosity and profile.
  • Viscosity 95-100 Krebs µ
  • Relative Density 1.2 – 1.25
  • Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
  • Drying time: Touch dry ½ – 1 hour. Hard dry 4 hours at 25 degrees.
  • Recoating time: 4 – 6 hours.
  • Requirements: 2 coats.





  • Keep containers properly sealed.
  • Store away from direct heat, sun and severe cold.





  • 5 litres and 20 litres




  • Detailed safety information: refers to the material safety data sheet for this product.
  • Do not apply directly to bare metal surfaces.
  • Do not paint in wet or cold weather. (Minimum 8ºC.)
  • Drying times will be extended during wet or cold weather conditions.
  • Do not apply direct to chalky or friable surfaces. Apply a penetrating coat of Versus Bonding Liquid or Versus Plaster Primer.