Skip to content
Versus Architect SpecificationsVersus Architect Specifications
Versus Architect Specifications
Data Sheets & Information for Versus products
  • Home
  • Versus Coating
  • Products
    • Product Listing
    • Premium Paint Range
    • Economy Paint Range (Water Based)
    • Preparation Materials
    • Preparation Range (Solvent Based)
    • Preparation Range (Water Based)
  • Contact
011 885 3136
 
  • Home
  • Versus Coating
  • Products
    • Product Listing
    • Premium Paint Range
    • Economy Paint Range (Water Based)
    • Preparation Materials
    • Preparation Range (Solvent Based)
    • Preparation Range (Water Based)
  • Contact

Category Archives: Uncategorised

Wood Surfaces (Painted) – Doors, Door Frames, Window Frames, Shutters – External

UncategorisedBy Versus Specialist28th May 2019

  PREPARATION Ensure that all surfaces are clean, dry and sound. Moisture content in wood must be below 14%. Sand wood with fine grit sandpaper (P220). Dust off with mutton cloth. Fill holes and other blemishes with a Wood filler. Allow 12 hours to dry. Sand surface to a smooth finish. Apply 1 coat Versus…

Wood Surfaces (Natural) – External

Uncategorised, Wood Surfaces - Natural, Wood Surfaces (Natural) - ExternalBy Versus Specialist28th May 2019

Plaster / Concrete Wall Surfaces – External

External, Plaster / Concrete Wall Surfaces, UncategorisedBy Versus Specialist28th May 2019

SURFACE PREPARATION Ensure that all surfaces are clean, dry and sound. Concrete must cure for a minimum of 28 days. Remove any residual oil with Versus Degreaser. This can be brushed on. Leave for 30 Min to react, rinse thoroughly with fresh water. High pressure rinsing is optional (if possible). Allow to dry completely. Algae…

Versus Floor Paint

Products, Uncategorised, Versus Floor PaintBy Versus Specialist21st May 2019

Gypsum plaster / rhinolite

Preparation of New Surfaces, UncategorisedBy Versus Specialist12th May 2019
12
© 2019 Versus Paint

DISCLAIMER
The above information is given in good faith but without warranty due to the fact that the methods of application, location and condition of the substrates being coated are beyond our control.