Versus Masonry Surface Conditioner With Anti Fungal  

                             

Data sheet no 23-2015

PRODUCT DESCRIPTION:

 

Solvent based Acrylic Copolymer masonry surface conditioner.

 

USES:

 

• Used as a first coat on high Mpa masonry surfaces, gypsum plaster, friable concrete surfaces.

 

FEATURES:

 

• Can be over coated with most water and solvent based paints.
• Prevents water ingress but allows moisture to evaporate through the film.

 

PRODUCT INFORMATION:

 

• Type: Solvent based acrylic copolymer.

• Appearance:  Matt.
• Colors:  Off white only.
• Density: 1.30 – 1.35.
• Viscosity at 25ºC (Stormer) : 60 – 65 K.U.s
• Flash Point: 36ºC.

 

APPLICATION DETAILS:

 

• Mixing: Stir well before use.
• Method: Brush or roller. Can be sprayed.
• Thinning: Can be thinned up to 25% with Mineral Turpentine to assist penetration.
• Clean up: Mineral Turpentine.

Spreading rate: 10 – 12 m ²/l depending on surface porosity and profile.

 

 

 

 

• Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
• Drying time: Touch dry 1 hour. Hard dry 4 hours at 25 degrees.
• Recoating time: 4 hours.
• Requirements: 2 coats.

 

SURFACE PREPARATION:

 

• New Surfaces and previously painted surfaces must be sound, clean and dry before painting. Ensure substrates are free of any grease or oil by cleaning with Sugar Soap if necessary.

 

STORAGE:

 

• Keep containers properly sealed.
• Store away from direct heat, sun and severe cold.

 

PACKAGING:

 

• 20 Litres.

PRECAUTIONS:

• Detailed safety information: refers to the material safety data sheet for this product.
• Do not apply directly to bare metal surfaces.
• Drying times will be extended during wet or cold weather conditions.
• Thin and clean up only with Mineral Turpentine.