Printable PDF: VERSUS MASONRY SURFACE CONDITIONER WITH ANTI FUNGAL
|
PRODUCT DESCRIPTION: |
Solvent based Acrylic Copolymer masonry surface conditioner.
|
USES: |
- Used as a first coat on high Mpa masonry surfaces, gypsum plaster, friable concrete surfaces.
|
FEATURES: |
- Can be over coated with most water and solvent based paints.
- Prevents water ingress but allows moisture to evaporate through the film.
|
PRODUCT INFORMATION: |
- Type: Solvent based acrylic copolymer.
- Appearance: Matt.
- Colors: Off white only.
- Density: 1.30 – 1.35.
- Viscosity at 25ºC (Stormer) : 60 – 65 K.U.s
- Flash Point: 36ºC.
|
APPLICATION DETAILS: |
- Mixing: Stir well before use.
- Method: Brush or roller. Can be sprayed.
- Thinning: Can be thinned up to 25% with Mineral Turpentine to assist penetration.
- Clean up: Mineral Turpentine.
- Spreading rate: 10 – 12 m ²/l depending on surface porosity and profile.
- Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
- Drying time: Touch dry 1 hour. Hard dry 4 hours at 25 degrees.
- Recoating time: 4 hours.
- Requirements: 2 coats.
|
SURFACE PREPARATION: |
- New Surfaces and previously painted surfaces must be sound, clean and dry before painting. Ensure substrates are free of any grease or oil by cleaning with Sugar Soap if necessary.
|
STORAGE: |
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
|
PACKAGING: |
- 20 Litres.
|
PRECAUTIONS: |
- Detailed safety information: refers to the material safety data sheet for this product.
- Do not apply directly to bare metal surfaces.
- Drying times will be extended during wet or cold weather conditions.
- Thin and clean up only with Mineral Turpentine.