- SURFACE PREPARATION
Ensure that all surfaces are clean, dry and sound.
Remove any oil / contaminants with Versus Degreaser. This can be brushed on.
Leave for 30 Min to react, rinse thoroughly with fresh water.
Dry surface to prevent any flash rust from forming and ensure that surface is painted within 2 hours.
Apply 1 coat Versus Universal Undercoat (VUC)
- FINISHING COATS
APPLY Finishing Coats: 2 coats Versus Versathane (VVT) or Versus Eggshell Enamel (VEE) or Versus Matt Enamel (VME), or Versus Enamel Gloss Enamel (VGE)
- See table below for approximate dying times and spread rates
|
SYSTEM |
APPLICATION |
WOOD SURFACES – EXTERNAL (DOORS, DOOR FRAMES, WINDOW FRAMES |
PRODUCT REFERENCE CODE |
RECOATING TIME / DRYING TIME AT 23°C |
SPREADING RATE M² per liter |
| Preparation | Ensure that all surfaces are clean, dry and sound.
Refer to Surface Preparation |
||||
| Primer Coat | Brush, roller, spray | Application of one coat Versus Universal Undercoat (VUC) |
VUC
|
12 hours
|
8-10
|
| First Coat | Brush, roller, spray | Application of 1st coat VERSUS PREMIUM RANGE
Versus Versathane (VVT) or Versus Eggshell Enamel (VEE) or Versus Matt Enamel (VME), Versus Enamel Gloss Enamel (VGE) |
VVT VEE VME VGE
|
12 hours
|
8-10
|
| 2nd Coat | Brush, roller, spray | Application of 2nd coat |
12 hours
|
8-10 |