Printable PDF: Versus Galvanized Iron Primer
|
PRODUCT DESCRIPTION: |
A Versatile, premium quality anti corrosive etch primer for exterior galvanized.
|
USES: |
- Primer for correctly prepared Galvanized iron and non-ferrous metal.
|
FEATURES AND BENEFITS: |
- Excellent adhesion and corrosion resistance.
- Quick drying- recoat in 4 hours.
- Provides an excellent primed surface for a wide range of decorative topcoats.
- No added Lead.
|
PRODUCT INFORMATION: |
| Appearance: | Matt to Low Sheen |
| Colour: | Cream |
| Binder Type: | BVP/Phenolic |
| Density at 23°ͨ: | Approx. 1.03 |
| Solid Content: | By Wight Approx. 38% By Volume Approx. 21% |
| Packaged Viscosity: | 23°ͨ Approx. 70KU |
| Spreading Rate: | B5 to 10 ²m per litre depending on surface porosity, profile And application method |
| Recommended DFT per coat: | Min 20µm Max 40µm |
| Recommended WFT per coat: | Min 95µm Max 190µm |
| Flash Point: | 12°ͨ |
|
APPLICATION DETAILS: |
| Mixing: | Sir until homogeneous with a flat paddle |
| Application Conditions: | Surface temperature between 10-35°ͨ Relative Humidity between 10-85% or 2°ͨ above dew point minimum |
| Application Methods: | Brush, Rollers or spray |
| Thinning: | Thinning not recommended. For conventional spray applications thin with 5 to 10% Etch Primer thinner |
| Drying Time: | Touch dry 1 hour at 23°ͨ (Recoating times will be extended during cool, wet or humid conditions) |
| Cleaning of equipment: | After use, remove as much product as possible, and then clean immediately with Etch Primer Thinner |
| Substrates: | Well prepared Galvanized iron and non-ferrous metals Ensure surfaces are pre-cleaned. |
| Coats Required: | Apply one to two coats Versus Galvanized Iron Primer depending on the severity of the conditions. |
| Top Coat: | Over- coat primer with two coats of selected Versus decorative top coat. |
| Precautions: | Do not apply during cold (below 10°ͨ) or wet weather. Not suitable for direct application to powdery or friable surfaces whether previously painted or not. Do not apply over rusty unprepared metal surfaces. Quick drying- avoid application to very tot surfaces. Not designed to withstand prolonged natural weathering. It should be over coated with conventional coatings within 18-24 hours, particularly in marine atmosphere. |